FRP pickling tank manufacturers introduce the characteristics of pickling tank:
1 Light weight: The glass fiber reinforced plastic pickling tank manufacturers introduced that the density of glass fiber reinforced plastic is about 1/4 that of steel, about 1/3 lighter than metal aluminum, and the static mechanical strength can approach or exceed the level of ordinary carbon steel.
2. Corrosion resistance. By selecting different types of FRP resins, it can resist various acids, alkalis, salts, and various oils and solvents. It can be widely used in various aspects of chemical corrosion prevention, and can replace stainless steel, non-ferrous metals, etc material.
3. The inner wall has a smooth surface roughness coefficient n = 0.0084, good sanitary performance, easy to clean, and anti-microbial corrosion. If the food-grade resin is basic, it is non-toxic and tasteless, which can ensure the sanitary requirements of the product.
4. The glass fiber reinforced plastic pickling tank manufacturers introduce low temperature resistance, which can be used at minus 80c °, suitable for cold areas.
5. The thermal expansion coefficient is 2 * 10-5 / c °, and the thermal conductivity is 0.2kcal. m / m2.hc ° Good insulation performance.
6. Easy to form and convenient to maintain, especially suitable for equipment with complicated structure. Large containers can be wound on site as a whole.
7.Introduction of FRP pickling tank manufacturers According to requirements, it can be equipped with FRP level gauge, FRP guardrail, FRP ladder, FRP platform and other components.
| Copyright © 2015 Hebei Yiyang Antai Environmental Protection Equipment Co., Ltd. - FRP pickling tank | FRP purification tower | FRP desulfurization tower | FRP mixing tank All rights reserved. |
Address: Chengnan Development Zone, Huanghua City, Hebei Province Telephone: 0317-5628177 Mobile: 15233270999
Fax: 0317-5625066 Website: http://cafethera.com Technical Support: Cangzhou Xianyue Network QQ79471598