Compared with other glass fiber reinforced plastic products, the glass fiber reinforced plastic acid mist extraction tower has a very harsh environment. Not only must it be exposed to acid and alkaline decay for a long time, but also it must be subjected to the tower's own pressure and solution pressure, as well as to things. The current wind pressure, so the tower must definitely end up with a special plan to resist all kinds of pressure, we will introduce you in detail below.
In terms of the plan of the glass fiber reinforced plastic shell, we have given priority to his anti-corrosiveness, after analyzing the strength reduction of the tower body and the evacuation of the hand lay-up molding process, we extracted the environment of each part of the tower according to the acid mist. The tower-shaped meeting uses the environment to carefully select a resin material with good alkali resistance and high layout strength, and a gel coat resin with good waterproof and anti-aging properties. It will be implemented in spite of the worst environment. Inside, the entire FRP shell can still work normally, and the FRP components are connected with rich reserve strength. In order to make the configuration have a longer service life, the internal and external components of the entire extraction tower are all made of highly corrosion-resistant materials, and the tower body does not have any Exposed metal, restrained from rust. According to the body type of each model, a comprehensive layout of cylindrical, double-cylinder segmentation and slicing is adopted. The inner shell of the tower adopts the production technology of rigid winding technology started today. It has the characteristics of high strength, good quality and excellent performance. It guarantees the good corrosion resistance of glass fiber reinforced plastic, and can also connect high tensile and compressive strength. This is the result of a program that takes all factors into account.
It is used for roof and ground placement of high-rise buildings, and because of the low speed fan, low noise, low power consumption and low configuration resistance. The upper part of the tower is sprayed with alkaline extraction liquid. The acidic and harmful gases entering the tower body from the lower part and the upper part of the spray liquid flow countercurrently. The acid mist exhaust gas is compressed by the fan to purify the pressure equalization chamber composed of the inner and outer jackets of the tower. After the two-stage spray treatment of unequal speed circuitous treatment, it enters the treatment device of the inner tube of the purification tower. The exhaust gas first determines the packing layer composed of flower-shaped ball packing, and then the two-phase spray treatment is punished. The gas-liquid two-phase Enriched warfare produces a neutralizing response and achieves the purpose of efficient purification. The punished exhaust gas is finally discharged into the atmosphere after the dehydration treatment of the end dehydrator. This exhaust gas can reach the municipal emission standard, which is lower than the national emission standard.
| Copyright © 2015 Hebei Yiyang Antai Environmental Protection Equipment Co., Ltd. - FRP pickling tank | FRP purification tower | FRP desulfurization tower | FRP mixing tank All rights reserved. |
Address: Chengnan Development Zone, Huanghua City, Hebei Province Telephone: 0317-5628177 Mobile: 15233270999
Fax: 0317-5625066 Website: http://cafethera.com Technical Support: Cangzhou Xianyue Network QQ79471598