FRP purification tower washing tower material is also an energy-saving material. If a manual paste method is used, the temperature during molding is generally performed at room temperature or below 100 ° C, so its energy consumption for molding is very low. Even for those molding methods that use mechanical molding methods, such as molding, winding, injection, RTM, spraying, extrusion, etc., the molding temperature is much lower than metal materials and other non-metal materials, so the energy consumption of molding can be reduced. Greatly reduced.
Because the glass fiber reinforced plastic washing tower washing tower products can be designed and manufactured by themselves according to different operating environments and special performance requirements, as long as the appropriate raw material varieties are selected, they can basically meet the performance requirements of various uses for the product. Therefore, the glass fiber reinforced plastic washing tower washing tower material is a designable material variety. FRP washing tower washing tower products, another one of the distinguishing characteristics of metal materials. As long as the appropriate raw material laying method and arrangement procedure are selected according to the product design, the materials and structure of the glass fiber reinforced plastic washing tower washing tower can be completed at one time.
| Copyright © 2015 Hebei Yiyang Antai Environmental Protection Equipment Co., Ltd. - FRP pickling tank | FRP purification tower | FRP desulfurization tower | FRP mixing tank All rights reserved. |
Address: Chengnan Development Zone, Huanghua City, Hebei Province Telephone: 0317-5628177 Mobile: 15233270999
Fax: 0317-5625066 Website: http://cafethera.com Technical Support: Cangzhou Xianyue Network QQ79471598