FRP Desulfurization Dust Collector Principle and Introduction. The boiler desulfurization and dust collector uses the principles of inertial collision, condensation, and centrifugal force. Under the action of the induced draft fan, the flue gas falls from a certain height and hits the liquid surface at high speed to form water mist. Most of the particles sink into the water and are collected in the dust collector shunt. Under the action of the atomizing airflow, the droplets collide and condense to form a water-ash mixture. The water-ash mixture passes through the cyclone impeller to separate the water and water, thereby achieving its desulfurization—dust removal—dehydration effect. The product also has a unique adjustable hood, which can be arbitrarily adjusted on the top of the device to adapt to various air volumes, so that the flow rate of the flue gas is controlled to ensure its normal operation. No matter how large the induced draft fan is, it will not carry water and corrode. Its supporting facilities not only reduce the loss, but also reduce the maintenance and repair costs. The dust collector is a device used to remove harmful dust in the gas phase. On this basis, the desulfurization effect is increased, which is a desulfurization dust collector. Desulfurization and dust removal are generally wet desulfurization and dust removal. Wet desulfurization and dust removal include water film desulfurization and dust removal, and impact water bath desulfurization and dust removal. After years of improvement, it has developed into various types of water film desulfurization dust collectors such as Venturi type, swirl plate type, swirl column type, float ball type, and sieve plate type. The equipment technology has become increasingly mature, each with its own advantages and disadvantages. , Enterprises can choose different types according to their own needs.
| Copyright © 2015 Hebei Yiyang Antai Environmental Protection Equipment Co., Ltd. - FRP pickling tank | FRP purification tower | FRP desulfurization tower | FRP mixing tank All rights reserved. |
Address: Chengnan Development Zone, Huanghua City, Hebei Province Telephone: 0317-5628177 Mobile: 15233270999
Fax: 0317-5625066 Website: http://cafethera.com Technical Support: Cangzhou Xianyue Network QQ79471598