白小姐中特网必选一肖

Times [Font: large, medium and small ]

FRP pickling tank purchase parameters

In order to facilitate the user to purchase the pressure, temperature, diameter, volume, media and other process parameters of the FRP pickling tank, and the properties of the analysis, the user can combine the following parameters according to his actual situation, easy to purchase!
(1) Pressure:
Maximum working pressure: The highest pressure that a pressure vessel can reach during normal work, exceeding the role of this pressure safety device. Corresponding design temperature, design pressure: It is used to determine the thickness of the pressure vessel shell, that is, the design pressure and design pressure are higher than or equal to the maximum working pressure. Nominal pressure: A standardized series of pressure values where many pressures drop to a certain value.
(2) Temperature:
A physical quantity that indicates how hot or cold an object is. It is a sign of the average kinetic energy of molecular motion.
Design temperature: The temperature refers to the pressure vessel under normal operating conditions and the corresponding design pressure. The set temperature and pressure components must not be higher than the maximum temperature that the component can reach. The metal temperature is 0 ° C. Reached, that is, the design temperature.
b. Test temperature: refers to the temperature of the metal container in the experiment.
(3) Straight path: general inner diameter of the sleeve, the unit is millimeter.
(4) Product capacity: the product content of the pressure vessel, the unit is cubic meters.
(5) Medium quality: pressure vessel material.
Toxicity: extreme, high, mild and mild
b. Flammability: flammable, explosive
2.If you are not sure when you can dress up a substance, please consult the company or the reference side, if necessary material sample immersion test;
3. The softening point of the glass fiber reinforced plastic pickling tank is 108 ° C, and the minimum maximum breaking point is -70 ° C, so the People's Party tank can usually be used to dress liquids to 40 ° C and 60 ° C;
4 FRP pickling tank inlet and discharge port, level gauge, flange, etc. form a whole welding, no matching mouth is needed. Wear acid and alkaline materials, and configure acid and alkali resistant gaskets. In all organic compounds (especially organic solvents), the configuration is not easy to dissolve the rubber pad;
5, glass fiber reinforced plastic pickling tank is not suitable for holding strong oxidants (such as temperature 60 ℃, sulfuric acid concentration over 75%, 30% or more thick, etc.) and good organic solvents, benzene, ether, ester, Ketone), etc .;
6 FRP pickling tank is made of polypropylene which can be dressed at room temperature with inorganic acids, alkalis, salts, most materials and many organic compounds.


NEXT: The main processing method of glass fiber reinforced plastic pickling tank
Next: How to extend the service life of FRP pickling tanks
Copyright © 2015 Hebei Yiyang Antai Environmental Protection Equipment Co., Ltd. - FRP pickling tank | FRP purification tower | FRP desulfurization tower | FRP mixing tank All rights reserved.
Address: Chengnan Development Zone, Huanghua City, Hebei Province Telephone: 0317-5628177 Mobile: 15233270999
Fax: 0317-5625066 Website: http://cafethera.com Technical Support: Cangzhou Xianyue Network QQ79471598